CleaverBrooks ADAC 1000, Operation Manual

Page: 72 / 140

Chapter 3 — Commissioning
3-50 Part No. 750-386
3.31-Display Configuration
Most of the PanelView parameters are preset and should not be
changed. A few commonly used PV configuration features are
described here.
3.31.1 - Date and Time
In addition to the procedure described in 3.28 above, the system date
and time can be changed using PV configuration. Press <PanelView
Config> from the Main Menu to access. You will be prompted for a
password.
To change the date, select Terminal Settings>Time/Date/Regional
Settings>Date.
To change the time, select Terminal Settings>Time/Date/Regional
Settings>Time.
Note: For additional PanelView Plus setup information see
“Procedure to Load and Set Up a PV+ Rev3.doc”,
available on the CB web site.
Figure 3-50. PanelView Plus Configuration Screen
Figure 3-51. Date / Time Screens