CleaverBrooks ADAC 1000, Operation Manual

Page: 102 / 140

APPENDIX A - Variable Frequency Drive Parameters
A-8 Part No. 750-386
415 Encoder Speed Read-Only
416 Fdbk Filter Sel 0 None
419 Notch FilterFreq 0 0.0 Hz
420 Notch Filter K 0.3 0.3 Hz
427 Torque Ref A Sel 0 Torque SetPt
428 Torque Ref A Hi 1000 100.0%
429 Torque Ref A Lo 0 0.0%
435 Torque Setpoint1 0 0.00%
436 Pos Torque Limit 2000 200.0%
437 Neg Torque Limit -2000 –200.0%
440 Control Status Read-Only
441 Torq Current Ref Read-Only
445 Ki Speed Loop 78 7.8
446 Kp Speed Loop 63 6.3
447 Kf Speed Loop 0 0
448 Spd Err Filt BW 2000 200.0 R/s
449 Speed Desired BW 0 0.0 Radians/Sec
450 Total Inertia 0.10 0.10
451 Speed Loop Meter Read-Only 0.0
454 Rev Speed Limit 0 0.0 Hz
459 PI Deriv Time 0 0 Secs
460 PI Reference Hi 100 100%
461 PI Reference Lo -100 -100%
462 PI Feedback Hi 100 100%
463 PI Feedback Lo 0 0%
476 Scale1 In Value 0 0.0
477 Scale1 In Hi 0 0.0
478 Scale1 In Lo 0 0.0
482 Scale2 In Value 0 0
483 Scale2 In Hi 0 0
484 Scale2 In Lo 0 0
595 Port Mask Act Read-Only
596 Write Mask Cfg Read-Only XXXXXXXX XX11111X
597 Write Mask Act Read-Only
598 Logic Mask Act Read-Only XXXXXXXX XX111111
599 - end Parameters NOT USED