System Management Commands
78-20269-01 Command Line Interface Reference Guide
92
5
TCAM resources
--------------
Maximum number of miscellaneous TCAM rules: 314
Used number of miscellaneous TCAM rules: 26
Maximum number of routing TCAM rules: 196
Used number of routing TCAM rules: 3
5.16
set system mode
The set system mode Privileged EXEC mode command puts the device into
switch mode (Layer 2 mode) or router mode (Layer 3 mode).
Syntax
set system mode {
router | switch}
Parameters
•
router—Specifies that the device functions as a switch-router.
•
switch—Specifies that the device functions as a switch.
Default Configuration
The default configuration is switch mode (Layer 2).
Command Mode
Privileged EXEC mode
User Guidelines
After executing the command, the Startup Configuration file is deleted and the
device is rebooted. It is highly recommended to back up the Startup Configuration
file before executing this command.
Example
The following example configures the device to function as a switch-router (Layer
3), with QoS and Policy based VLANs.
Console#
set system mode router
