manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 369

Spanning-Tree Commands

78-20269-01 Command Line Interface Reference Guide

370

29

 

Command Mode 

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

The priority value must be a multiple of 16.

Example

The following example configures the spanning priority on 

gi

15 to 96 

Console(config)# interface gi15

Console(config-if)# spanning-tree port-priority 96

29.10 spanning-tree portfast

Use the spanning-tree portfast Interface Configuration (Ethernet, port-channel) 
mode command to enable the PortFast mode. In PortFast mode, the interface is 
immediately put into the forwarding state upon linkup, without waiting for the 
standard forward time delay. Use the no form of this command to disable the 
PortFast mode.

Syntax

spanning-tree portfast [auto]

no spanning-tree portfast

Parameters

auto—Specifies that the software waits for 3 seconds (with no BPDUs received on 
the interface) before putting the interface into the PortFast mode.

Default Configuration

PortFast mode is disabled.

Command Mode 

Interface Configuration (Ethernet, port-channel) mode

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands