manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 524

DHCP Relay Commands

78-20269-01 Command Line Interface Reference Guide

525

38

 

Parameters

N/A

Default Configuration

Disabled

Command Mode

Interface Configuration (VLAN, Ethernet, Port-channel) mode

User Guidelines

The operational status of DHCP Relay on an interface is active if one of the 
following conditions exist: 

•

DHCP Relay is globally enabled, and there is an IP address defined on the 
interface.

            Or

•

DHCP Relay is globally enabled, there is no IP address defined on the 
interface, the interface is a VLAN, and option 82 is enabled.

Example

The following example enables DHCP Relay on VLAN 21.

Console(config)# 

interface vlan

 21

Console(config-if)# 

ip dhcp relay enable

38.3

ip dhcp relay address

Use the ip dhcp relay address Global Configuration mode command to define the 
DHCP servers available for the DHCP relay. Use the no form of this command to 
remove servers from the list.

Syntax

ip dhcp relay address 

ip-address

no ip dhcp relay address [

ip-address

]

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands