manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 614

Voice VLAN Commands

78-20269-01 Command Line Interface Reference Guide

616

42

 

no voice vlan id

Parameters

vlan id 

vlan-id

—Specifies the voice VLAN (range 1-4094).

Default Configuration

VLAN ID 1.

Command Mode

Global Configuration mode

User Guidelines

If the Voice VLAN does not exist, it is created automatically. It will not be removed 
automatically by the no version of this command.

Example

The following example enables VLAN 104 as the voice VLAN on the device.

Console(config)# 

voice vlan id

 35

For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCP will 

cause the switch to advertise the administrative voice VLAN as static voice VLAN 

which has higher priority than voice VLAN learnt from external sources.

Are you sure you want to continue? (Y/N)[Y] 

Y

30-Apr-2011 00:19:36 %VLAN-I-VoiceVlanCreated: Voice Vlan ID 104 was created.

console(config)#30-Apr-2011 00:19:51 %VLAN-I-ReceivedFromVSDP: Voice VLAN updated 

by VSDP. Voice VLAN-ID 104, VPT 5, DSCP 46

42.4

voice vlan vpt

Use the voice vlan vpt Global Configuration mode command to specify a value of 
VPT (802.1p VLAN priority tag) that will be advertised by LLDP in the Network 
Policy TLV. The no format of the command returns the value to the default.

Syntax

voice vlan vpt 

vpt-value

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands