Power over Ethernet (PoE) Commands
78-20269-01 Command Line Interface Reference Guide
301
23
Syntax
power inline limit
power
no power inline limit
Parameters
power—States the port power consumption limit in Milliwatts (Range: 0-15400
Default Configuration
The default value is the maximum power allowed in the specific working mode:
•
15.4W
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example sets inline power on a port.
console(config)#
interface
gi1
console(config-if)#
power
inline
limit
2222
23.6
power inline limit-mode
Use the power inline limit-mode Global Configuration mode command to set the
power limit mode of the system. Use the no form of this command to return to
default.
Syntax
power inline limit-mode
{class | port}
no power inline limit-mode
Parameters
•
class—The power limit of a port is based on the class of the PD (Power
Device) as detected during the classification process
•
port—The power limit of a port is fixed regardless of the class of the
discovered PD.
