manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 603

Quality of Service (QoS) Commands

78-20269-01 Command Line Interface Reference Guide

605

41

 

Parameters

•

reserved add/remove—Add or remove the table of reserved addresses 
below. 

•

ip-address—Adds/discards packets with the specified IP source or 
destination address.

•

mask—Specifies the network mask of the IP address.

•

prefix-length—Specifies the number of bits that comprise the IP address 
prefix. The prefix length must be preceded by a forward slash (/).

•

reserved—Discards packets with the source or destination IP address in 
the block of the reserved (Martian) IP addresses. See the User Guidelines 
for a list of reserved addresses.

Default Configuration

Martian addresses are allowed.

Command Mode

Global Configuration mode

User Guidelines

For this command to work, 

security-suite enable

 must be enabled globally.

security-suite deny martian-addresses 

reserved 

adds or removes the addresses 

in the following  table:

Address block

Present use

0.0.0.0/8 (except 
when 0.0.0.0/32 is 
the source 
address)

Addresses in this block refer to source hosts 
on "this" network.

127.0.0.0/8 

This block is assigned for use as the Internet 
host loopback address.

192.0.2.0/24

This block is assigned as "TEST-NET" for use 
in documentation and example code.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands