Cisco Small Business 300 1.1 Series, Administration Manual

Page: 32 / 706

User Interface Commands
78-20269-01 Command Line Interface Reference Guide 33
2
2
User Interface Commands
2.1 enable
The enable EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [
privilege-level
]
Parameters
privilege-level—Specifies the privilege level at which to enter the system. (Range:
1, 7, 15)
Default Configuration
The default privilege level is 15.
Command Mode
EXEC mode
Example
The following example enters privilege level 7.
Console> enable 7
enter password:**********
Console#Accepted
The following example enters privilege level 15.
Console> enable
enter password:**********
Console#Accepted