manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 409

Virtual Local Area Network (VLAN) Commands

78-20269-01 Command Line Interface Reference Guide

410

30

 

30.8

name

Use the name Interface Configuration (VLAN) mode command to name a VLAN. 
Use the no form of this command to remove the VLAN name. This is the same as 
using the vlan command with the name parameter.

Syntax

name 

string

no name

Parameters

string—Specifies a unique name associated with this VLAN. (Length: 1–32 
characters)

Default Configuration

No name is defined.

Command Mode

Interface Configuration (VLAN) mode. It cannot be configured for a range of 
interfaces (range context).

User Guidelines

The VLAN name must be unique.

Example

The following example assigns VLAN 19 the name Marketing.

Console(config)# 

interface vlan

 19

Console(config-if)# 

name

 Marketing

30.9

switchport protected-port

Use the switchport protected-port Interface Configuration mode command to 
isolate Unicast, Multicast, and Broadcast traffic at Layer 2 from other protected 
ports on the same switch. Use the no form of this command to disable protection 
on the port.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands