manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 644

Smartport Commands

78-20269-01 Command Line Interface Reference Guide

646

43

 

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines 

This command is an extension of the switchport trunk allowed vlan command. 
Unlike the switchport trunk allowed vlan command, the 

vlan-list

 parameter of this 

command may include the voice VLAN (when it is the default VLAN). If the default 
VLAN is the voice VLAN, the following occurs:

•

add 

all

 — Adds the interface to the default VLAN as an egress tagged port.

•

remove 

all 

— Removes the interface from the default VLAN.

Example

To add port 1 to VLANs 1-5:

console(conf)#

interface

 gi1

console(conf-if)#

smartport switchport trunk allowed vlan

 

add

 1-5

43.16 smartport switchport trunk native vlan 

Use the smartport switchport trunk native vlan Interface Configuration (Ethernet, 
port-channel) mode command to define the native VLAN when the interface is in 
trunk mode. Use the no form of this command to restore the default configuration.

Syntax

smartport switchport trunk native vlan 

native

-

vlan-id

Parameters

native-vlan-id—Specifies the native VLAN ID.

Default Configuration

VLAN 1

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands