manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 668

Link Layer Discovery Protocol (LLDP) Commands

78-20269-01 Command Line Interface Reference Guide

670

44

 

Network policies:

Location:

Civic-address: 61:62:63:64:65:66

44.23 show lldp local tlvs-overloading

When an LLDP packet contains too much information for one packet, this is called 
overloading. Use the show lldp local tlvs-overloading EXEC mode command to 
display the status of TLVs overloading of the LLDP on all ports or on a specific 
port.

Syntax

show lldp local tlvs-overloading 

[interface-id]

Parameters

interface-id—Specifies a port ID.

Default Configuration

If no port ID is entered, the command displays information for all ports.

Command Mode 

EXEC mode

User Guidelines

The command calculates the overloading status of the current LLDP configuration, 
and not for the last LLDP packet that was sent.

Example

Switch# 

show lldp local tlvs-overloading

 gi1

TLVs Group             Bytes       Status

------------           ------      --------------

Mandatory               31         Transmitted

LLDP-MED Capabilities   9          Transmitted

LLDP-MED Location       200        Transmitted

802.1                   1360       Overloading

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands