manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 214

Terminal Access Controller Access-Control System Plus () Commands

78-20269-01 Command Line Interface Reference Guide

215

17

 

The default port-number is 49.

If timeout is not specified, the global value is used.

If key-string is not specified, the global value is used.

If source is not specified, the global value is used.

Command Mode

Global Configuration mode

User Guidelines

Multiple tacacs-server host commands can be used to specify multiple hosts.

If no host-specific timeout, key, or source values are specified, the global values 
apply to each host.

Example

The following example specifies a  host.

Console(config)# 

tacacs-server host

 172.16.1.1

17.2

tacacs-server key

Use the tacacs-server key Global Configuration mode command to set the 
authentication encryption key used for all  communications between the 
device and the daemon. Use the no form of this command to disable the 
key.

Syntax

tacacs-server key 

key-string

no tacacs-server key

Parameters

key-string—Specifies the authentication and encryption key for all  
communications between the device and the server. This key must 
match the encryption used on the  daemon. (Length: 0–128 characters)

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands