manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 254

802.1x Commands

78-20269-01 Command Line Interface Reference Guide

255

20

 

User Guidelines

The default value of this command should be changed only to adjust to unusual 
circumstances, such as unreliable links or specific behavioral problems with 
certain clients and authentication servers.

Example

The following command sets the time interval during which the device waits for a 
response to an EAP request/identity frame to 3600 seconds.

Console(config)# 

interface 

gi15 

Console(config-if)# 

dot1x timeout tx-period

 3600

20.8

dot1x max-req

Use the dot1x max-req Interface Configuration mode command to set the 
maximum number of times that the device sends an Extensible Authentication 
Protocol (EAP) request/identity frame (assuming that no response is received) to 
the client before restarting the authentication process. Use the no form of this 
command to restore the default configuration.

Syntax

dot1x max-req 

count

no dot1x max-req

Parameters

max-req 

count

—Specifies the maximum number of times that the device sends an 

EAP request/identity frame before restarting the authentication process. (Range: 
1–10)

Default Configuration

The default maximum number of attempts is 2.

Command Mode 

Interface Configuration (Ethernet) mode

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands