manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 661

Link Layer Discovery Protocol (LLDP) Commands

78-20269-01 Command Line Interface Reference Guide

663

44

 

User Guidelines

For each port, only one network policy per application (voice, voice-signaling, etc.) 
can be defined.

Example

This example creates a network policy for the voice-signally application and 
attaches it to port 1. LLDP packets sent on port 1 will contain the information 
defined in the network policy.

console(config)# 

lldp med network-policy

 1 voice-signaling vlan 1 

vlan-type

 

untagged 

up

 1 

dscp

 2

Console(config)# 

interface 

gi1

Console(config-if)# 

lldp med network-policy add

 1

44.18 lldp med network-policy voice auto

A network policy for voice LLDP packets can be created by using the 

lldp med 

network-policy (global)

. The lldp med network-policy voice auto Global 

Configuration mode is simpler in that it uses the configuration of the Voice 
appliation to create the network policy instead of the user having to manually 
configure it.

The lldp med network-policy voice auto command generates an LLDP MED 
network policy for voice, if the voice VLAN operation mode is auto voice VLAN. 
The voice VLAN, 802.1p priority, and the DSCP of the voice VLAN are used in the 
policy. Use the no form of this command to disable this mode. The network policy 
is attached automatically to the voice VLAN.

Syntax

lldp med network-policy voice auto

no lldp med network-policy voice auto

Parameters

N/A

Default Configuration

N/A

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands