manualshive.com logo in svg

Cisco Small Business 300 1.1 Series, Administration Manual

Share
Download
Cisco Small Business 300 1.1 Series Administration Manual Download Page 106

Clock Commands

78-20269-01 Command Line Interface Reference Guide

107

6

 

6.10

sntp unicast client enable

The sntp unicast client enable Global Configuration mode command enables the 
device to use Simple Network Time Protocol (SNTP)-predefined Unicast clients. 
Use the no form of this command to disable the SNTP Unicast clients.

Syntax

sntp unicast client enable

no sntp unicast client enable

Parameters

N/A

Default Configuration

The SNTP unicast client is disabled.

Command Mode

Global Configuration mode

User Guidelines

Use the 

sntp server

 Global Configuration mode command to define SNTP servers.

Example

The following example enables the device to use SNTP Unicast clients.

Console(config)# 

sntp unicast client enable

6.11

sntp server

The sntp server Global Configuration mode command configures the device to 
use the Simple Network Time Protocol (SNTP) to request and accept Network 
Time Protocol (NTP) traffic from a specified server (meaning to accept system 
time from an SNTP server). Use the no form of this command to remove a server 
from the list of SNTP servers.

Summary of Contents for Small Business 300 1.1 Series



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands