Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 404 / 432

Appendix F SSL Introduction
Before You Begin
F-4
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
• Use 443 (generally used for SSL transactions) as the SSL TCP service port
and 443 as the clear text port. Configure the server to not use SSL and to
monitor port 443. TCP service port 80 requests are serviced normally.
•
Use 443 as the SSL TCP service port and 81 (or another unused port) for the
clear text port. Configure the server to monitor port 81. TCP service port 80
requests are serviced normally.
All data sent on any other port is passed through transparently in both directions.
Before You Begin
Before configuring the SSL appliance you must have a certificate and keys for the
server. You can use the files you received from the Certificate Authority, copy the
keys and certificate from an existing secure server, use default keys and
certificates preloaded in the device, or generate your own keys and certificates.
Additionally, be aware that you must make several changes to your Web pages.
The nature of the changes depends upon whether you are securing a previously
unsecured site, or adding the SSL appliance to an already secure server
installation. These changes are described in section “Web Site Changes” in
Appendix B.
Using Existing Keys and Certificates
If you already have a secure server, you can transfer the keys and certificate to the
Secure Content Accelerator. Follow the instructions below, or refer to the Web
server software documentation for detailed information.
Note
Key and certificate file names cannot contain spaces and must be
compatible with the server operating system. When prompted either
to name a key or certificate file or check the name of a key or
certificate file, please ensure the names follow these conventions.