Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 390 / 432

Appendix D MiniMax Command Summary
Command Set
D-16
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Syntax Description
Usage Guidelines
Determine which interface to activate by the network location of the configuring
computer. If the configuring computer is located on the same network segment as
the “Server” port, activate the “Server” interface. If the configuring computer is
located on the same network segment as the “Network” port, activate the
“Network” interface. The behavior of the sbridge command used with no
arguments is as follows:
• If one active Ethernet connection is found, that interface is used.
•
If two active Ethernet connections are found, neither interface is used.
•
If no active Ethernet connections are found, no interface is used.
show
Displays information for the specified system.
show [bridge|download|arp|route]
Syntax Description
Usage Guidelines
If no system is specified, a help message is displayed.
network Keyword indicating the “Network” Ethernet interface
should be activated.
server Keyword indicating the “Server” Ethernet interface
should be activated.
bridge Specifies bridge information is to displayed..
download Specifies file download information is to be displayed.
arp Specifies ARP information is to be displayed.
route Specifies route information is to be displayed.