Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 325 / 432

C-133
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
localport
Specifies the TCP service port through which non-secure connections are
received.
localport <port|default>
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
log-url
Specifies a host for logging of URL requests.
log-url <ipaddr> [port <portid>] [facility <facilityid>]
no log-url <ipaddr>
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove the specified log-url server from the
list. Only one log-url server can be configured.
port The used to transfer non-secure traffic.
default Sets the port specification to 80.
ipaddr The IP address of the device to receive log-url
messages.
port Keyword indicating that a specific TCP port should be
used for communications.
portid The TCP port to be used.
facility Keyword indicating a specific facility should be used.
facilityid A numeral (from 0 to 7, inclusive) specifying the
facility to be used.