Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual, Page: 109 / 432

5-11
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Chapter 5 Graphical User Interface Reference
General Configuration Examples
Figure 5-6 RIP Configuration Example
3.
Scroll to the bottom of the page, if necessary, to see the Rip panel.
4. Select the Enabled check box.
5. Click Update.
Example: Adding a Route to the Routing Table
1.
Click Network to activate the Network tabs.
2.
Click the Route tab. The Route page opens, as shown in Figure 5-7.