Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 265 / 432

C-73
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
The access password is used when attaching to the device during a remote
management session.You are prompted to enter and verify the password. Use the
no form of the command with access or enable to clear the appropriate password
for the current device. Use no password idle-timeout to disable the timeout
feature.
Note
When using the password command in FIPS Mode to set an access
or enable, you must supply a password or passphrase of at least eight
characters.
rdate-server
Specifies and RDATE-protocol server to be used for date and time information on
the device.
rdate-server <ipaddr>
no rdate-server
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
access Sets or clears the device attach-level password.
enable Sets or clears the device enable-level password.
idle-timeout Keyword specifying that the idle-timeout period is to
be set.
minutes The number of minutes before a telnet or Web GUI
management session times out.
ipaddr The IP address of the RDATE server.