Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 283 / 432

C-91
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
Interface Configuration Command Set
Use these commands to manage the speed and duplex settings of the specified
Ethernet interface on the current Secure Content Accelerator. Enter Interface
Configuration mode by using the enable command in Non-Privileged mode and
the configure command in Privileged mode. Specify an Ethernet interface to
configure using the interface command in Configuration mode. The prompt
changes to
<config-if[interfacename]>>
.
auto
Sets the current Ethernet interface to autonegotiation, canceling any existing
forced duplex or speed setting.
auto
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
duplex
Forces the current Ethernet interface to full or half duplex.
duplex <full|half>
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
end
Exits Interface Configuration mode and returns to Configuration mode.
end
full Sets the current interface to full duplex.
half Sets the current interface to half duplex.