Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 310 / 432

Appendix C Command Summary
Configuration Command Set
C-118
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Certificate Configuration Command Set
Use Certificate Configuration commands to set up and manage certificate objects.
Enter Certificate Configuration mode by using the enable command in
Non-Privileged mode, the configure command in Privileged Mode, the ssl
command in Configuration mode, and the cert command in SSL Configuration
mode. The prompt changes to
<config-ssl-cert[certname]>>
.
binhex
Pastes a binary hex-encoded X509 certificate into the configuration manager.
binhex [value]
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste the certificate from the
cut buffer. You can use a text editor to copy the certificate from a file. After the
certificate is pasted, you must press Enter twice to complete the command.
der
Loads a DER-encoded X509 certificate file into the current object.
der [url]
Syntax Description
Usage Guidelines Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not enter the URL, you are prompted for it.
value The certificate that has been copied into the cut buffer.
url The location of the file.