Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 285 / 432

C-93
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
SSL Configuration Command Set
Use these commands to set up and manage the SSL configuration for the current
Secure Content Accelerator. Enter the SSL Configuration mode by using the
enable command in the Non-Privileged Mode, configure command in the
Privileged Mode, and the ssl command in Configuration Mode. The prompt
changes to
<config-ssl[devicename]>>
.
backend-server
Creates and/or configures the specified backend server and enters Backend Server
Configuration mode for that server.
backend-server <servname> [create]
no backend-server <servname>
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove the specified backend server. A
device can have a total of 255 (SCA) or 4095 (SCA2) servers in any combination
of backend, reverse-proxy, or standard secure servers. When a backend server has
been specified for removal, all connections are allowed to finish before the
backend server is actually removed. Backend server names can consist of Arabic
numerals and upper- and lowercase alphabetic, underscore (_), hyphen (-), and
period (.) characters. Backend server names must begin with an alphabetic
character or underscore and have a limit of 15 characters.
Related Commands
show ssl (Non-Privileged Command Set)
show ssl server (Non-Privileged Command Set)
See the section “Backend Server Configuration Command Set”.
servname The name of the backend server.
create Creates a new backend server named servname and
enters Backend Server Configuration mode for that
object.