Appendix C Command Summary
Initiating a Management Session
C-10
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Note
When prompted to supply a file name during serial management,
you must supply it as a URL in the form of
HOST/PATH/FILENAME using the http://, https://, ftp://, or tftp://
prefix.
Telnet
After you have assigned an IP address to the Cisco Secure Content Accelerator
using the serial connection configuration manager, you can connect to the
appliance via telnet.
1.
Initiate a telnet session with the IP address previously assigned to the
appliance.
2.
An
SCA>
prompt is displayed.
Note
When prompted to supply a file name during a telnet
management session, you must supply it as a URL in the
form of HOST/PATH/FILENAME using the http://, https://,
ftp://, or tftp:// prefix.
Summary of Contents for CSS11501 - 100Mbps Ethernet Load Balancing Device
