Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device, Configuration Manual

Page: 353 / 432

C-161
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-05
Appendix C Command Summary
Configuration Command Set
sslport
Specifies the port on which the logical secure server receives SSL traffic. The SSL
traffic is decrypted and sent to the physical server using the TCP service port
previously specified with the remoteport command.
sslport <port|default>
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
Note
This command has the same effects as the localport
command and is included only for backwards compatibility.
Related Commands
localport (Server Configuration Command Set)
remoteport (Server Configuration Command Set)
sslv2 enable
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Usage Guidelines Availability: Serial, Telnet
Using the no form of the command disables SSL version 2 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
port The TCP service port through which SSL traffic is
received by the current secure logical server.
default Returns the setting to the default of 443.