Chapter 3 Installing the Switch in a Rack
Rack-Mounting the Switch
3-6
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Note
Some equipment racks provide a power strip along the length of one of
the rear posts. If your rack has this feature, consider the position of the
strip when planning fastener points. Before installing the L brackets on
the chassis, determine whether to install the chassis from the front or the
rear of the rack.
Step 2
Install the L brackets, which connect the chassis to the rack, as follows:
a.
Remove the screws from the front of the switch side-cover panels.
b.
Attach the left and right L brackets using the six M4 Phillips pan-head screws
(three screws per side) provided in the rack-mount kit.
See
Figure 3-1
for the Catalyst 4503 switch,
Figure 3-2
for the Catalyst 4506
switch, or
Figure 3-3
for the Catalyst 4507R switch, or
Figure 3-4
for the
Catalyst 4510R switch.
Table 3-1
Rack-Mount Kit Checklist
Quantity
Part Description
2
L brackets
6
M4 Phillips pan-head screws
6
12-24 x 3/4-inch Phillips binder-head screws