Cisco Catalyst 3650 Series, Command Reference Manual

Page: 457 / 1108

flow monitor
To create a flow monitor, or to modify an existing flow monitor, and enter flow monitor configuration mode,
use the
flow monitor command in global configuration mode. To remove a flow monitor, use the no form of
this command.
flow monitor monitor-name
no flow monitor monitor-name
Syntax Description
Name of the flow monitor that is being created or modified. monitor-name
Command Default
Flexible NetFlow flow monitors are not present in the configuration.
Command Modes
Global configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
Flow monitors are the Flexible NetFlow component that is applied to interfaces to perform network traffic
monitoring. Flow monitors consist of a flow record and a cache. You add the record to the flow monitor after
you create the flow monitor. The flow monitor cache is automatically created at the time the flow monitor is
applied to the first interface. Flow data is collected from the network traffic during the monitoring process
based on the key and nonkey fields in the flow monitor's record and stored in the flow monitor cache.
Examples The following example creates a flow monitor named FLOW-MONITOR-1 and enters flow monitor
configuration mode:
Device(config)# flow monitor FLOW-MONITOR-1
Device(config-flow-monitor)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
431
flow monitor