show storm-control
To display broadcast, multicast, or unicast storm control settings on the switch or on the specified interface
or to display storm-control history, use the
show storm-control
command in user EXEC mode.
show storm-control
[
interface-id
] [
broadcast| multicast| unicast
]
Syntax Description
(Optional) Interface ID for the physical port (including type, stack member
for stacking-capable switches, module, and port number).
interface-id
(Optional) Displays broadcast storm threshold setting.
broadcast
(Optional) Displays multicast storm threshold setting.
multicast
(Optional) Displays unicast storm threshold setting.
unicast
Command Modes
User EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
When you enter an interface ID, the storm control thresholds appear for the specified interface.
If you do not enter an interface ID, settings appear for one traffic type for all ports on the switch.
If you do not enter a traffic type, settings appear for broadcast storm control.
Examples
This is an example of a partial output from the
show storm-control
command when no keywords are entered.
Because no traffic-type keyword was entered, the broadcast storm control settings appear.
Device>
show storm-control
Interface Filter State
Upper
Lower
Current
--------- ------------- ---------- --------- ---------
Gi1/0/1
Forwarding
20 pps
10 pps
5 pps
Gi1/0/2
Forwarding
50.00%
40.00%
0.00%
<output truncated>
This is an example of output from the
show storm-control
command for a specified interface. Because no
traffic-type keyword was entered, the broadcast storm control settings appear.
Device>
show storm-control gigabitethernet 1/0/1
Interface Filter State
Upper
Lower
Current
--------- ------------- ---------- --------- ---------
Gi1/0/1
Forwarding
20 pps
10 pps
5 pps
The following table describes the fields in the show storm-control display:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
823
show storm-control
Summary of Contents for Catalyst 3650 Series
