Cisco Catalyst 3650 Series, Command Reference Manual

Page: 375 / 1108

show rep topology
To display REP topology information for a segment or for all segments, including the primary and secondary
edge ports in the segment, use the
show rep topology command in privileged EXEC mode.
show rep topology
[
segment segment-id
] [
archive
] [
detail
]
Syntax Description
(Optional) Specifies the segment
for which to display REP topology
information. The ID range is from
1 to 1024.
segment segment-id
(Optional) Displays the previous
topology of the segment. This
keyword is useful for
troubleshooting a link failure.
archive
(Optional) Displays detailed REP
topology information.
detail
Command Modes
Privileged EXEC (#)
Command History
Modification Release
This command was introduced Cisco IOS XE Denali 16.2.2
Examples
The following is sample output from the show rep topology command.
Device#
show rep topology
REP Segment 1
BridgeName
PortName Edge Role
---------------- ---------- ---- ----
10.64.106.63
Te5/4 Pri Open
10.64.106.228 Te3/4 Open
10.64.106.228 Te3/3 Open
10.64.106.67 Te4/3 Open
10.64.106.67 Te4/4 Alt
10.64.106.63 Te4/4 Sec Open
REP Segment 3
BridgeName
PortName Edge Role
---------------- ---------- ---- ----
10.64.106.63
Gi50/1 Pri Open
SVT_3400_2 Gi0/3 Open
SVT_3400_2 Gi0/4 Open
10.64.106.68 Gi40/2 Open
10.64.106.68 Gi40/1 Open
10.64.106.63 Gi50/2 Sec Alt
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
349
show rep topology