Cisco Catalyst 3650 Series, Command Reference Manual

Page: 955 / 1108

location plm calibrating
To configure path loss measurement (CCX S60) request for calibrating clients, use the location plm calibrating
command in global configuration mode.
location plm calibrating
{
multiband | uniband
}
Syntax Description
Specifies the path loss measurement request for calibrating clients on the
associated 802.11a or 802.11b/g radio.
multiband
Specifies the path loss measurement request for calibrating clients on the
associated 802.11a/b/g radio.
uniband
Command Default
No default behavior or values.
Command Modes
Global configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The uniband is useful for single radio clients (even if the radio is a dual band and can operate in the 2.4-GHz
and the 5-GHz bands). The multiband is useful for multiple radio clients.
Examples
This example shows how to configure the path loss measurement request for calibrating clients on the associated
802.11a/b/g radio:
Device# configure terminal
Device(config)#
location plm calibrating uniband
Device(config)# end
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
929
location plm calibrating