Cisco Catalyst 3650 Series, Command Reference Manual

Page: 694 / 1108

show platform hardware fed switch
To display device-specific hardware information, use the show platform hardware fed switchswitch_number
command.
This topic elaborates only the QoS-specific options, that is, the options available with the
show platform
hardware fed switch { switch_num | active | standby } qos command.
show platform hardware fed switch { switch_num| active| standby } qos { afd | { config type type | [ asic
asic_num ]|
stats clients
{
all
|
bssid id
|
wlanid id
}}|
dscp-cos counters
{
iifd_id id
|
interfacetype number
}
|
le-info | { iifd_id id | interface type number }| policer config { iifd_id id | interface type number } | queue |
{ config | { iifd_id id | interface type number | internal port-type type { asic number [ port_num ]}} | label2qmap
| [ aqmrepqostbl| iqslabeltable| sqslabeltable ]| { asicnumber } | stats | { iifd_id id | interface type number |
internal { cpu policer | port-type type asic number }{ asicnumber [ port_num ]}}} | resource }
Syntax Description
Switch for which you want to display information. You have the following options:
•
switch_num
—
ID of the switch.
• active — Displays information relating to the active switch.
•
standby
—
Displays information relating to the standby switch, if available.
switch { switch_num |
active | standby }
Displays QoS hardware information. You must choose from the following options:
• afd — Displays Approximate Fair Drop (AFD) information in hardware.
•
dscp-cos
—
Displays information dscp-cos counters for each port.
•
leinfo
—
Displays logical entity information.
•
policer
— Displays QoS policer information in hardware.
•
queue
—
Displays queue information in hardware.
• resource — Displays hardware resource information.
qos
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
668
show platform hardware fed switch