Cisco Catalyst 3650 Series, Command Reference Manual

Page: 783 / 1108

epm access-control open
To configure an open directive for ports that do not have an access control list (ACL) configured, use the epm
access-control open command in global configuration mode. To disable the open directive, use the no form
of this command.
epm access-control open
no epm access-control open
Syntax Description
This command has no arguments or keywords.
Command Default
The default directive applies.
Command Modes
Global configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command to configure an open directive that allows hosts without an authorization policy to access
ports configured with a static ACL. If you do not configure this command, the port applies the policies of the
configured ACL to the traffic. If no static ACL is configured on a port, both the default and open directives
allow access to the port.
You can verify your settings by entering the show running-config privileged EXEC command.
Examples
This example shows how to configure an open directive.
Device(config)# epm access-control open
Related Commands
Description Command
Displays the contents of the current running configuration
file. show running-config
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
757
epm access-control open