Cisco Catalyst 3650 Series, Command Reference Manual

Page: 486 / 1108

record
To add a flow record for a Flexible NetFlow flow monitor, use the record command in flow monitor
configuration mode. To remove a flow record for a Flexible NetFlow flow monitor, use the no form of this
command.
record record-name
no record
Syntax Description
Name of a user-defined flow record that was previously configured. record-name
Command Default
A flow record is not configured.
Command Modes
Flow monitor configuration
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SE
Usage Guidelines
Each flow monitor requires a record to define the contents and layout of its cache entries. The flow monitor
can use one of the wide range of predefined record formats, or advanced users may create their own record
formats.
You must use the
no ip flow monitor
command to remove a flow monitor from all of the interfaces to
which you have applied it before you can modify the parameters for the
record
command for the flow
monitor.
Note
Examples The following example configures the flow monitor to use FLOW-RECORD-1:
Device(config)# flow monitor FLOW-MONITOR-1
Device(config-flow-monitor)# record FLOW-RECORD-1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
460
record