Cisco ASR 5000, Installation Manual

Page: 250 / 294

Interface Specifications
The table below lists the line card interfaces for use within the chassis.
Table 88: Line Card Interfaces
Notes Connector Type Quantity Port Card Type
— RJ-45, RS-232 serial 1 Console
SPIO
— RJ-45 to DB-9 1 Console Cable Assembly
— Optical SFP 2 Gigabit Ethernet
1 RJ-45, Ethernet 2 10/100 Mbps
— 10-pin, Molex 1 CO Alarm
— Dual 10-pin Molex to barrier
terminal 1 CO Alarm cable Assembly
2 BNC, coaxial cable 1 BITS BNC (optional)
3-pin, wire-wrap BITS 3-Pin (optional)
1 RJ-45, Ethernet 8 10/100 Ethernet
FLC2
3 SFP-SX 1 Gigabit Ethernet GLC2
SFP-LX
SFP-T, copper RJ-45
4 SFP-SX 4 Gigabit Ethernet QGLC
SFP-LX
SFP-T, copper RJ-45
5 10GBase-SR, SFP+ 1 10 Gigabit Ethernet XGLC
10GBase-LR, SFP+
— Single-mode Fiber, LC duplex 1 ATM/POS OC-3 SM IR-1 OLC2
Multi-mode Fiber, LC duplex ATM/POS OC-3 Multi-Mode
— Single-mode Fiber, LC duplex 1 Channelized (STM-1/OC-3)
SM IR-1
CLC2
Multi-mode Fiber, LC duplex Channelized
(STM-1/OC-3)Multi-Mode
Notes
1 An RJ-45 Ethernet interface may have more than one pin-out configuration, depending on the type of
cable used.
ASR 5000 Installation Guide
234
Technical Specifications
Interface Specifications