Chrysler 2007 Town and Country Manual Download Page 144 | Manualshive

Page: 144 / 504

background image

4. Auxiliary Seating—

The 2nd row seats are removed from the vehicle. Then
the third row seats can be installed in either the rear or
middle seat position.

If the seat is not occupied, the seatback can be folded
forward to obtain additional cargo space. To fold the
seatback forward, pull the handle labeled “1” located
behind the seat on the passenger side.

The seatback will latch in the folded position. To assure
the seatback is latched in the folded position, additional
downward pressure on the seatback may be required
when folding.

The same lever is used to return the seatback to the
upright position.

NOTE:

The head restraints are removable, if needed. To

remove them, press the release tab on the right side of the
base of the head restraint.

WARNING!

•

Not all head restraints in this vehicle are the same.
Head restraints from one seating position should not
be removed and installed in any other seating posi-
tion. In a collision, serious injury or death may result
if the proper head restraint is not installed on each
seat.

•

The cargo area in the rear of the vehicle should not
be used as a play area by children. They could be
seriously injured in a collision. Children should be
seated and using the proper restraint system.

•

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously
injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

144

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
142
143
144
145
146
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Town and Country

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Brand: Calira Pages: 14

Brand: Ecco Pages: 9

Brand: Ecco Pages: 9

Brand: TATA Motors Pages: 164

Brand: RAM Pages: 20

Brand: Kia Pages: 10

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: REVCAMUK Pages: 4

Brand: Volvo Pages: 188

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

DELTA DL FIX 209FP

Brand: Menabo Pages: 8

Brand: M7 SPEED Pages: 6

Brand: Scion Pages: 24

Brand: Qeedon Pages: 2

Brand: v.link Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands