Chrysler 2007 Town and Country Manual Download Page 473

Page: 473 / 504

Miles

42, 000

48, 000

54, 000

60, 000

66, 000

72, 000

(Kilometers)

(70 000)

(80 000)

(90 000)

(100 000) (110 000) (120 000)

[Months]

[42]

[48]

[54]

[60]

[66]

[72]

Change engine oil and engine oil filter.

Rotate Tires

Inspect the brake linings.

Inspect the engine air cleaner filter, replace if
necessary.

Replace the

engine air cleaner filter.

Inspect the tie rod ends and boot seals.

Inspect the

PCV valve

and replace if neces-

sary.

Inspect the serpentine drive belt on 3.3 liter
and 3.8 liter engines, replace if necessary. ‡

Flush and replace the engine coolant at 60
months or 102,000 miles, whichever comes
first.

Replace the air conditioning filter.

SCHEDULE “A”

473

T
E

S
C

D
U

L
E

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands