Chrysler 2007 Town and Country Manual Download Page 456

Page: 456 / 504

3. Squeeze the socket assembly tabs to remove it from the
housing.

4. Pull the bulb to remove it from the socket.

5. Replace the bulb, reinstall the socket, and reattach the
light assembly.

Center High Mounted Stop Light (CHMSL)

1. Remove the two screws securing the CHMSL.

2. Twist the bulb socket to remove from the CHMSL
housing.

3. Pull the bulb out of the socket.

4. Replace the bulb, reinstall the socket and reattach the
CHMSL.

456

MAINTAINING YOUR VEHICLE

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands