Chrysler 2007 Town and Country, Manual, Page: 141 / 504

Share

Page: 141 / 504

Chrysler 2007 Town and Country Manual Download Page 141

The release lever is below the seat and is accessible from
the front and back of the seat.

Rear Seat Descriptions

7 Passenger Model — 2– passenger bucket seats in the
second position and 3– passenger bench seat or 50/50
bench seat in the third position. All rear seats are remov-
able.

Rear Bench Seating Flexibility

The 3– passenger bench seat may be adjusted to any of 3
positions on its tracks while installed in the vehicle. The
bench seat may also be moved to the second seating
position or removed from the vehicle.

1. Normal Seating—

The 2nd and 3rd row seats are installed. The 3rd row
bench seat is in the full rear position on the tracks.

2. Increased Storage—

Increased storage area is provided by adjusting 3rd row
bench seat to the intermediate track position. Rear seat-
ing for 3 passengers (children) is still provided.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

141

3

«
...
139
140
141
142
143
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments