Chrysler 2007 Town and Country Manual Download Page 131

Page: 131 / 504

To Unfold Third Row Seats

1. Pull up on the assist strap to lift the seat out of the
storage bin and push the seat forward until the anchors
latch.

2. Pull release strap marked “1” to unlock the recliner.

3. Pull release strap marked “3” to return the seatback to
its full upright position.

4. Adjust the head restraint to the desired position.

Third Row Seatback Lift Assist Strap

Third Row Seat Release Strap 3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

131

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands