Chrysler 2007 Town and Country Manual Download Page 377

Page: 377 / 504

− Highway Driving

Reduce speed.

− Air Conditioning

Turn off temporarily.

− refer to Cooling System Operating information in the

Maintenance section of this manual for more informa-
tion.

RECREATIONAL TOWING (BEHIND
MOTORHOME, ETC.)

TOWING THIS VEHICLE BEHIND ANOTHER
VEHICLE (Flat towing with all four wheels on the
ground)

Recreational towing for this vehicle is not recommended.

NOTE:

If the vehicle requires towing make sure all four

wheels are off the ground.

STARTING AND OPERATING

377

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Chrysler 2007 Town and Country, Manual, Page: 377 / 504

Search results

Summary of Contents for 2007 Town and Country

Reviews: