Chrysler 2007 Town and Country Manual Download Page 475

Page: 475 / 504

Miles

102, 000

108, 000

114, 000

120, 000

(Kilometers)

(170 000)

(180 000)

(190 000)

(200 000)

[Months]

[102]

[108]

[114]

[120]

Change engine oil and engine oil filter.

Rotate Tires

Inspect the brake linings.

Inspect the engine air cleaner filter, replace if necessary.

Replace the

engine air cleaner filter.

Inspect the tie rod ends and boot seals.

Check the

PCV valve

and replace, if necessary.

Flush and replace the engine coolant if not done at 60
months.

Inspect the serpentine drive belt on 3.3 liter and 3.8 liter
engines, replace if necessary. ‡

Replace the

spark plugs & ignition cables

on 3.3 liter

and 3.8 liter engines.

SCHEDULE “A”

475

T
E

S
C

D
U

L
E

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands