Chrysler 2007 Town and Country, Manual, Page: 221 / 504

Share

Page: 221 / 504

Chrysler 2007 Town and Country Manual Download Page 221

SALES CODE RAZ — AM/ FM STEREO RADIO
WITH CASSETTE TAPE PLAYER, CD PLAYER
AND CD CHANGER CONTROLS

NOTE:

The radio sales code is located on the lower left

side of your radio faceplate.

Operating Instructions — Radio

NOTE:

Power to operate the radio is controlled by the

ignition switch. It must be in the ON or ACC position to
operate the radio.

Power Switch, Volume Control

Press the ON/VOL control to turn the radio on. Turn the
volume control clockwise to increase the volume. The
volume will be displayed and continuously updated
while the button is pressed.

Seek Button (Radio Mode)

Press and release the Seek button to search for the next
station in either the AM or FM mode. Press the top of the
button to seek up and the bottom to seek down. Holding
the button will by pass stations until you release the
button.

RAZ Radio

UNDERSTANDING YOUR INSTRUMENT PANEL

221

4

«
...
219
220
221
222
223
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments