Chrysler 2007 Town and Country Manual Download Page 36 | Manualshive

Page: 36 / 504

background image

If the inside or outside door handles are used while the
power sliding door is activated, the power sliding door
feature will be canceled and the door must be opened or
closed manually.

To avoid unintentional operation of the power sliding
door from the rear seats, press the On /Off button located
in the overhead console to disable the switches for the
rear seat passengers.

NOTE:

•

If anything obstructs the power sliding door while it is
closing or opening, the door will automatically reverse
to the closed or open position, provided it meets
sufficient resistance.

•

The driver’s side sliding door cannot be opened while
the fuel door is open. This feature operates only when
the sliding door is fully closed prior to opening the
fuel door.

•

If the power sliding door is not in the full open or close
position, it will fully open when a power sliding door
switch is pressed. To close the door, wait until it is fully
open and then press the switch again.

•

The power sliding door switches will not operate if the
vehicle is in gear or the vehicle speed is above 0 mph
(0 km/h).

•

If the power sliding door encounters multiple obstruc-
tions within the same cycle, the system will automati-
cally stop and must be opened or closed manually.

WARNING!

You or others could be injured if caught in the path
of the sliding door. Make sure the door path is clear
before closing the door.

36

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
34
35
36
37
38
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Town and Country

Brand: Roav Pages: 10

Brand: WABCO Pages: 48

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

XEBRA ZAPCAR Series

Brand: Zap Pages: 16

Brand: Ferve Pages: 28

Brand: Renault Pages: 3699

Brand: Menabo Pages: 8

Civic Hatch 2017

Brand: Honda Pages: 687

Brand: Buick Pages: 20

PLATINUM HT051202

Brand: Haltech Pages: 10

Brand: Nav TV Pages: 8

Brand: Suzuki Pages: 190

ESPAS10 MONEYBOX

Brand: BFT Pages: 26

Brand: Edelbrock Pages: 29

Brand: Kuda Pages: 3

Brand: Dakota Digital Pages: 2

Brand: Discount Car Stereo Pages: 4

Brand: DV8 Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands