Chrysler 2007 Town and Country Manual Download Page 383 | Manualshive

Page: 383 / 504

background image

Jacking Instructions — Stow ’n Go Seating

Preparations For Jacking

WARNING!

Carefully follow these tire changing warnings to help prevent personal
injury or damage to your vehicle:

•

Do not attempt to change a tire on the side of the vehicle close to
moving traffic. Pull far enough off the road to avoid the danger of
being hit when operating the jack or changing the wheel.

•

Always park on a firm, level surface before raising the vehicle.

•

Block the wheel diagonally opposite the wheel to be raised.

•

Apply the parking brake firmly before jacking.

•

Never start the engine with the vehicle on a jack.

•

Do not let anyone sit in the vehicle when it is on a jack.

•

Do not get under the vehicle when it is on a jack.

•

Only use the jack in the positions indicated.

•

If working on or near a roadway, be extremely careful of motor
traffic.

•

To assure that spare tires, flat or inflated are securely stowed, spares
must be stowed with the value stem facing the ground.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

•

Turn on the Hazard Warning Flasher.

•

Block both the front and rear

of the wheel diagonally oppo-
site the jacking position. For
example, if changing the right
front tire, block the left rear
wheel.

•

Passengers should not remain in the vehicle when the
vehicle is being jacked.

WHAT TO DO IN EMERGENCIES

383

6

«
...
381
382
383
384
385
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Town and Country

Brand: Yakima Pages: 11

Brand: Ford Pages: 52

Brand: Phonocar Pages: 6

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Automotive 31006

Brand: KRAFTWERK Pages: 2

10-8002-C11670C

Brand: Saleen Pages: 17

Brand: Maserati Pages: 210

Brand: OnStar Pages: 22

Brand: Mercedes-Benz Pages: 358

Brand: iArmor Pages: 6

Brand: PEUGEOT Pages: 232

1995 Roadmaster

Brand: Buick Pages: 340

Brand: Whelen Engineering Company Pages: 4

20111 Highlander

Brand: Toyota Pages: 9

Brand: Fab Fours Pages: 16

Brand: Farad Pages: 8

Brand: LAS Pages: 4

Brand: LAS Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands