Chrysler 2007 Town and Country, Manual, Page: 187 / 504

Share

Page: 187 / 504

Chrysler 2007 Town and Country Manual Download Page 187

Rear Cupholders

There are dual stationary cupholders located in the
passenger side rear trim panel and a single stationary cup
holder on the driver side rear trim panel.

There are also dual underseat cupholders for the 2nd seat
passengers. With a bench seat in the 2nd seat position
these cupholders slide out from under the center of the
seat.

If your vehicle is equipped with quad seats in the 2nd
seat position, these cupholders are located on the out-
board side of the seat pedestal.

NOTE:

•

The quad seat cupholders will remain upright if the
seat is tilted forward.

Quad Seat Cupholder

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

187

3

«
...
185
186
187
188
189
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments