Chrysler 2007 Town and Country Manual Download Page 129

Page: 129 / 504

3. Pull up on the seatback recliner lever located on the
outboard side of the seat, to return the seatback to its full
upright position.

4. Close the storage bin cover and adjust the head
restraint to the desired position.

To Fold Third Row Seats

1. Lower the head restraint to its full down position.

2. Pull release strap marked “1” located on the rear of the
seat to lower the seatback.

Second Row Seatback Release Lever

Third Row Seatback Release Strap 1

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

129

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands