Chrysler 2007 Town and Country Manual Download Page 344 | Manualshive

Page: 344 / 504

background image

•

The Tire Pressure Monitor System (TPMS) will warn
the driver of a low tire pressure if the tire pressure falls
below the low pressure warning threshold for any
reason, including low temperature effects.

•

The TPMS will continue to warn the driver of low tire
pressure as long as the condition exists, and will not
turn off until the tire pressure is at or above recom-
mended cold placard pressure. Once the low tire
pressure warning telltale has been illuminated, the tire
pressure must be increased to the recommended cold
placard pressure in order for the TPM warning telltale
to be turned off. The system will automatically update
and the TPM warning telltale will extinguish once the
updated tire pressures have been received.

NOTE:

The vehicle may need to be driven for up to 10

minutes above 15 mph (25 km/h) to receive this infor-
mation.

Base Tire Pressure Monitoring System without
Electronic Vehicle Information Center (EVIC) — If
Equipped

The Tire Pressure Monitor System (TPMS) uses wireless
technology with wheel rim mounted electronic sensors to
monitor tire pressure levels (EXCLUDING THE SPARE
TIRE). Sensors, mounted to each wheel as part of the
valve stem, transmit tire pressure readings to the Re-
ceiver Module.

NOTE:

It is particularly important, for you to check the

tire pressure in all of your tires regularly and too main-
tain the proper pressure.

The Tire Pressure Monitor System (TPMS) consists of the
following components:

•

Receiver Module

•

4 Tire Pressure Monitoring Sensors

•

Tire Pressure Monitoring Telltale Lamp

344

STARTING AND OPERATING

«
...
342
343
344
345
346
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Town and Country

Brand: Feniex Pages: 6

Brand: Mazda Pages: 527

2008 Escalade EXT

Brand: Cadillac Pages: 496

Brand: EUFAB Pages: 12

Brand: Saab Pages: 3

Brand: Motoalliance Pages: 8

Parktronic system Volkswagen Golf MK7

Brand: Car-Systems Pages: 10

Brand: Improved Racing Pages: 17

Brand: Draw tite Pages: 4

Brand: Honda Pages: 10

2DA 008 136-031

Brand: Hella Pages: 2

Brand: Mobileye Pages: 29

Sprinter Bed System DIY

Brand: FVC Pages: 8

Brand: AUTOTECH Pages: 4

Brand: Cadillac Pages: 438

Brand: Curt Group Pages: 2

Brand: MiX Telematics Pages: 39

Brand: Honda Pages: 326

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands