Chrysler 2007 Town and Country, Manual, Page: 76 / 504

Share

Page: 76 / 504

Chrysler 2007 Town and Country Manual Download Page 76

•

If the shoulder belt contacts the face or neck, move the
child closer to the center of the vehicle. If this doesn’t
help, move the child to the center rear seating position
and use the lap belt. Never allow a child to put the
shoulder belt under an arm or behind their back.

NOTE:

For

additional

information,

refer

to

www.seatcheck.org or call 1-866-SEATCHECK

.

WARNING!

•

Improper installation can lead to failure of an
infant or child restraint. It could come loose in a
collision. The child could be badly injured or
killed. Follow the manufacturer’s directions ex-
actly when installing an infant or child restraint.

•

A rearward facing child restraint should only be
used in a rear seat. A rearward facing child re-
straint in the front seat may be struck by a
deploying passenger airbag which may cause se-
vere or fatal injury to the infant.

76

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
74
75
76
77
78
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments