Chrysler 2007 Town and Country Manual Download Page 54 | Manualshive

Page: 54 / 504

background image

chime and flash the Seat Belt Warning Light for 96
seconds or until the driver’s or front passenger’s seat belt
is buckled.

The Enhanced Warning System (BeltAlert) will be reacti-
vated if the driver’s or front passenger’s seat belt is
unbuckled for more than 10 seconds and the vehicle
speed is greater than 5 mph (8 km/h).

Belt Alert Programming

The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by your authorized dealer or by
following these steps:

NOTE:

The following steps must occur within the first

60 seconds of the ignition switch being turned to the
ON/RUN position. DaimlerChrysler does not recom-
mend deactivating the Enhanced Warning System
(BeltAlert).

1. With all doors closed and the ignition switch in any
position except On or Start, buckle the driver’s seat belt.

2. Turn the ignition switch to the ON/RUN position
(engine does not need to be running), and wait for the
Seat Belt Warning Light to turn off.

3. Within 60 seconds of turning the ignition switch to the
ON/RUN position, unbuckle and then re-buckle the
driver’s seat belt at least three times within 10 seconds,
ending with the seat belt buckled.

NOTE:

Watch for the Seat Belt Warning Light to turn on

while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt each time,
while unbuckling and re-buckling the seat belt.

4. Turn the ignition switch to the OFF position. A single
chime will sound to signify that you have successfully
completed the programming.

54

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
52
53
54
55
56
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Town and Country

Brand: EAL Pages: 4

Brand: Mercedes-Benz Pages: 30

Brand: GMC Pages: 499

Brand: Kia Pages: 290

Brand: Mercedes-Benz Pages: 358

Brand: Hyundai Pages: 18

Brand: Jaeger Pages: 11

Brand: Honda Pages: 569

FXX ATM Emulator

Brand: BMW Pages: 5

Brand: iSimple Pages: 8

Brand: Tesla Pages: 42

Brand: Uniden Pages: 16

Brand: Fab Fours Pages: 13

Brand: Prorack Pages: 7

Brand: PNI Pages: 12

Brand: AL-KO Pages: 88

Brand: DIGITAL DELAY Pages: 11

ELECTRONIC SPEEDOMETER 1323

Brand: VDO Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands